XEROX PRINTER SAYS LOAD MANUAL FEED SLOT

Product tư vấn for: zagranmama.com B205 Multifunction Printer, zagranmama.com B205 Multifunction Printer Family


Using the Manual Feed Slot

The manual feed slot is located on the front of your printer. It can be closed when not in use, making the product more compact. Use the manual feed slot lớn print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray.

Bạn đang xem: Xerox printer says load manual feed slot

When using the manual feed slot for special media, it may be necessary to lớn use the rear cover for the output. For additional information on truyền thông output locations, refer to Media output đầu ra Locations (Output Tray or Rear Cover).

Acceptable print media is plain paper from 3.0 x 5.0 inches khổng lồ 8.5 x 14 inches Legal (76 mm x 127 mm to lớn 216 mm x 356 mm) và weighing between 16 lb and 58 lb (60 gsm và 220 gsm). For additional information on truyền thông specifications, refer to Paper & Paper Tray Specifications.

Loading the Manual Feed Slot

Press to xuất hiện the manual feed slot, located on the front of the printer.Note: The manual feed slot holds 1 sheet of the following media: đôi mươi lb (80 gsm) plain paper, transparency, label, envelope or cardstock.Load the print material between the width guides with the print side facing up.
*
Note: Hold a transparency by the edge & avoid touching the print side.Adjust the paper guide to lớn the width of the print material.

Xem thêm: 53 Hình Ảnh Miễn Phí Của Cặp Vợ Chồng Ôm Nhau Đẹp Lãng Mạn Nhất (Cặp Đôi)

Note: If the truyền thông prints with curl, wrinkles, a crease, or đen bold lines, xuất hiện the rear cover và print again.After loading paper, if prompted, verify the paper kích cỡ and type settings on the screen. To lớn keep the same settings, press OK. To change the settings, press the down arrow, then press OK and adjust the settings:To select a paper size, press the up/down arrows to lớn select Paper Size, then press OK. Press the up/down arrows khổng lồ select the paper size you want, then press OK.To select a paper type, press the up/down arrows lớn select Paper Type, then press OK. Press the up/down arrows lớn select the paper type you want, then press OK.When printing from your computer, ensure you select the Paper option in the print driver to specify the correct paper kích cỡ and type. For the source, you must select Manual Feed Slot. Not confirming the paper details may result in printing delays.Note: The settings made from the print driver on your computer override the settings on the control panel.

Envelope Mode

Press to open the manual feed slot.Load the envelope short edge feed and with the flap facing down.
*
Adjust the paper guide khổng lồ the width of the print material.Note: If the media prints with curl, wrinkles, a crease, or đen bold lines, open the rear cover and print again.After loading paper, if prompted, verify the paper size and type settings on the screen. Lớn keep the same settings, press OK. Khổng lồ change the settings, press the down arrow, then press OK & adjust the settings:To select a paper size, press the up/down arrows to lớn select Paper Size, then press OK. Press the up/down arrows to select the paper form size you want, then press OK.To select a paper type, press the up/down arrows lớn select Paper Type, then press OK. Press the up/down arrows to lớn select the paper type you want, then press OK.When printing from your computer, ensure you select the Paper option in the print driver khổng lồ specify the correct paper kích cỡ and type.Note: For envelopes, select the Envelope tab và then select an envelope size.For the source, you must select Manual Feed Slot. Not confirming the paper details may result in printing delays.Note: The settings made from the print driver on your computer override the settings on the control panel.

Did this help?